Kodi: FLR.0158
Përbërësit: 1
Pamja: Pluhur
Ready-to-use conglomerate based on hydraulic lime, botticino, and siliceous aggregates, kaolin, and natural fibres, specifically for the construction, with the only addition of water, of resistant slabs and screeds, of normal weight, for ecological building interventions and in the restoration of vintage buildings and monuments.
EN 998-1
Llaçe për suva të brendshme dhe të jashtme – Llaç për çdo përdorim (GP)
Përmasa maksimale e agregatit: 5 mm
Përzierja me ujë: 18-20 %
Pot life: 60 min
Temperatura e aplikimit: +6 / +30 °C
Trashësia minimale e lejueshme: 2 cm
Lidhja e aderimit
> 1.2 MPa
Masa vëllimore
1950 kg/m³
Moduli elastik
14000 MPa
pH
12 _
Rezistenca në ngjeshje pas 01 dite
> 5 MPa
Rezistenca në ngjeshje pas 07 ditësh
> 18 MPa
Rezistenca në ngjeshje pas 28 ditësh
> 24 MPa
Rezistenca në përkulje pas 01 ditë
> 1.5 MPa
Rezistenca në përkulje pas 07 ditësh
> 4.5 MPa
Rezistenca në përkulje pas 28 ditësh
> 5.5 MPa
- Gështenjë e hapur
- Qese 25 kg
Approximately 17 kg/m² of SANASCREED for every centimetre of thickness to be implemented (approximately 1700 kg per cubic metre).
Laying slabs and screeds based on hydraulic lime.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
Pour about 2/3 of the mixing water into the mixer. Gradually add SANASCREED and the water still required, continue to mix until a homogeneous, lump-free mixture of the desired consistency is obtained. Support the product at the reference height and float until a smooth and planar surface is obtained, preparing the joints beforehand where necessary. The mixing water indicatively necessary is equal to 18-20% by weight (4.5 -5 litres per bag 25 kg).
- Mallë
- Pompë
- Shpatull
- Straight edge
- Ujë
- Beton
It is always essential to carry out preliminary tests to verify the appropriateness of the product, depending on specific requirements.
Protect fresh surfaces from direct exposure to sunlight and cure the protection and moist hardening.
Vuoi saperne di più sui nostri prodotti?