Structural, fibre-reinforced thixotropic cement skim coat, with excellent adhesion characteristics, resists compression, bending and abrasion, etc. Ideal for structural renovation of works and manufactured pieces in deteriorated concrete. Apply using a trowel.
Llaçe për suva të brendshme dhe të jashtme – Llaç për çdo përdorim (GP)
Jetëgjatësia: 12 muaj
Përmasa maksimale e agregatit: 0.7 mm
Pot life: 60 min
Rezistent ndaj rrezeve UV
Të përdoret me doreza mbrojtëse
Temperatura e aplikimit: +5 / +35 °C
Trashësia maksimale e lejueshme: 8 mm
Trashësia minimale e lejueshme: 3 mm
Lidhja e aderimit
Përcaktimi i kompaktësisë termike
Përmbajtja e klururit
< 0.01 %
> 12 _
< 0.37 _
Reagimi ndaj zjarrit
Resistenca nga karbonizimi
Resistenca nga rrëshqitja
Rezistenca nga ngjeshja
> 30 N/mm²
- E bardhë
- Qese 25 kg
Rheoplastic, thixotropic, structural, composite skim coat with a special cement and select silicate aggregates base, fibre-reinforced with a balanced mix of polypropylene fibres READYMESH and calcium meta-silicate micro-fibres, with the addition of specific agents with a high rate of micro-silicates. It provides, after hardening, high performance in terms of intrinsic permeability, resistant to run-off and hydrolysing activity, mechanical resistance, to abrasion and cavitation, anti-carbonising properties, chemical-physical stability, resistant to atmospheric aggression and run-off waters. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage).
Approximately 1.8 kg/m² of RASOWHITE for each millimetre of thickness to be made.
Repairs and protective coatings of civil building works in concrete (pillars, walls, balcony cornices, etc.).
The application surfaces should be clean, free of containment, inconsistent and incoherent parts, dust, etc., conveniently saturated with water to reach the "saturated to dry surface" condition.
Place approx. 2/3 of water in the mixer, adding RASOWHITE and the remaining water; continue mixing until you obtain an even mix free of lumps. The mixing water should be approx. 20 - 22% of the weight of the bag. Having completed mixing, wait a few minutes before applying.
Addition of BOND HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity.
- Llaçe çimentoje, gëlqereje e të përziera
Do not apply in the presence of direct sunshine or strong ventilation. Prolonged care for protection and humid seasoning of the surfaces created.