An anti-shrinkage, pourable, self-levelling, super-adhesive micro-mortar, based on high-strength cements, super-pozzolanic fillers, polymeric stabilisers and anti-shrinkage agents. Aggregates with a maximum size of 0.35 mm. Ideal for filling joints (gaps and/or interstices) in urban paving made of porphyry or stone slabs, even of large dimensions. For filling cracks and lesions on concrete and masonry structures.
Përmasa maksimale e agregatit: 0.50 mm
Pot life: 60 min
Jetëgjatësia: 12 muaj
Temperatura e aplikimit: +5/+35 °C
Rezistenca në ngjeshje pas 01 dite
> 35 N/mm²
Rezistenca në ngjeshje pas 28 ditësh
> 80 N/mm²
Lidhja e aderimit
> 2.5 N/mm²
Rezistenca në përkulje pas 28 ditësh
> 13 N/mm²
Rezistenca në përkulje pas 07 ditësh
> 11 N/mm²
Rezistenca në përkulje pas 01 ditë
> 8 N/mm²
No bleeding according to UNI 8998
Rezistenca në ngjeshje pas 07 ditësh
> 65 N/mm²
Përmbajtja e klururit
> 12 _
- Koli: 50 x (Qese 25 kg)
- Qese 25 kg
GROUT FILL achieves fluid and hyperfluid workability even with very low water / cement ratios (<0.4), thus resulting perfectly homogeneous, pourable, self-leveling and without water exudation phenomena. The very fine granulometry of the aggregates allows the perfect filling of spaces and particularly narrow discontinuities (<0.5 cm). The capillary absorption of the applied micro-mortar is very low, allowing great resistance to freeze-thaw cycles and washout. GROUT FILL achieves extremely high mechanical performance and is rich in microsilicates with pozzolanic activity and special additives that make it extremely durable even if positioned in particularly aggressive environments (due to contamination by chlorides, sulphates, marine atmospheres, fuels and automotive oils).
Approximately 1800 kg of GROUT FILL for each cubic metre of volume to be filled.
Filling the joints (vanishing points) in urban floorings in porphyry, stone slabs etc., in new installations and in the reinforcement of existing installations. Anchorages and rigid seals in general.
Remove the soilings, the crumbling and non-adhering parts and saturate beforehand with water.
Pour about 2/3 of the required mixture water in the mixer (about 3.5 -4 litres total per bag); gradually add the product and the water still required to get the desired consistency. Continue mixing until you obtain a homogeneous, lump-free mortar. Pour the compound thus obtained in the vanishing points to be filled.
- Gurë natyrorë dhe porfiret
- Nënshtresa çimentoje
Do not apply in the presence of stagnant water and direct solar irradiation, in anticipation of atmospheric precipitation and/or sudden drops in temperature.
Treat the hardening and the damp protection fresh mortar placed on site .