Dried, selected fine gravel, with particle size between 6 and 10 mm, specific for addition to premixed structural mortars and plasters, both castable and thixotropic, to improve or correct the particle size curve, based on the required increase in casting thickness.
Consumption (% by weight of components): 20-40 %
Jetëgjatësi e pakufizuar
Material 100% eco-friendly
Përmasa maksimale e agregatit: 10 mm
Rezistent ndaj rrezeve UV
- Gri e hapur
- Qese 25 kg
- Koli: 63 x (Qese 25 kg)
Variable according to the different design requirements for dilution of structural castable mortars (see details in the technical data sheets of the GROUT line products).
Addition to conglomerates based on mineral and polymeric hydraulic binders; size adaptation of premixed mortars and grouts.
Add the desired amount of fine gravel to the mixture, during the mixing of the same. Add any additional remaining water and product base, until a cohesive and lump-free mixture is obtained. Leave the mixed conglomerate to rest, with added gravel for a few minutes before laying it.
The dosage of GHIAIETTO 6.10, relative to the weight of the mixture of a product with water, can be maximum 30%-35% (100 kg of finished mixture with 30 kg of fine gravel).
PLEASE NOTE: to calculate the material required as a function of the volume to be filled, after having determined the required quantity of the preselected product based on the specific weight of the same (normally for a structural cement mortar it is about 1900 kg/m³), replace maximum 25% of the calculated weight with GHIAIETTO 6.10 . To facilitate the calculation, as a general rule consider using one bag of GHIAIETTO 6.10 for every three bags of (premixed) base product.
- Për tu shtuar në komponentët e tjerë
- Llaçe çimentoje, gëlqereje e të përziera
Excessive dosage of GHIAIETTO 6.10 could result in reductions even significant in the stated mechanical performance for the product it is added to. Always follow the maximum dosages specified.
For more information, please consult our Technical Service.