FLUID S

Superlubricating additive for concrete, mortar and grout mixing

Kodi: ADX.0061

Përbërësit: 1

Pamja: I lëngshëm

Superlubricating additive, defoamer, in aqueous solution, for concrete, mortars and grouts, either with cement or lime. Particularly suitable for concretes added with silica-fume, for the production of concretes with very high intrinsic watertightness.

Linee di appartenenza

Certifikata të fituara dhe Rregullore

EN 934-2

Vetitë themelore

i-pandezshëm

I pandezshëm

jetëgjatësia

Jetëgjatësia: 12 muaj

pa-tretës

Pa tretës

pesha-specifike

Pesha specifike: 1.18 kg/dm³

Veçoritë teknike

Viskoziteti

17.5 cP

Ngjyrat në dispozicion

- Kafe

Amballazhime dhe përmasa

- Bidon 10 kg

- Bidon 29 kg

- Fusto 235 kg

Vetitë

FLUID S, added to a correct mix of hydraulic binders, selected aggregates, MICROSIL 90 (thickened silica fume), and auxiliary fibres READYMESH PM-180 (multifilament polypropylene fibres) improves mechanical strength, watertightness, and overall hardness of the product.

Reference standards for the product: UNI 8145 - ASTM C 494 B,D,G

Konsumi

Add 0,7 to 2,0 kg of FLUID S for each quintal of hydraulic binder present in the mixture.

Fushat e përdorimit

Production of concretes, mortars, shotcrete, grout (cement- or lime-based), high workability (consistency class), reduced water/cement ratio, exempt from bleeding and segregation. Specific for manufacturing concretes with very high intrinsic watertightness (waterproof concretes).

Mënyra e përdorimit

FLUID S must be added to the anhydrous components of the conglomerate, together with the mixing water; the dosage of normal use is in the range 1-2% by weight, relative to the weight of the binders. After the addition of the product, provide for adequate mixing in order to obtain a homogeneous mixture free of lumps. FLUID S effectively performs its superlubricating action in different mixing conditions: concrete mixer, truck mixers, vertical axis mixers etc. with normal means of transport: truck mixers, truck mixer pumps, stationary pumps, etc. Any overages must be preliminarily verified with test mixes.

FLUID S is considered a neutral additive, i.e. it does not involve changes in normal times for gripping and hardening the conglomerate where it is inserted.

Mënyrat e përdorimit

- Për tu shtuar në komponentët e tjerë

Mjetet e pastrimit

- Ujë

Shtresat e lejuara

- Beton

- Llaçe çimentoje, gëlqereje e të përziera

Paralajmërime, masa paraprake dhe Ekologji

FLUID S significantly reduces the mixing water. Check the gauge of the mixer truck during the concrete loading phase. Excess water can affect the consistency and performance of the concrete.

Na kontaktoni

Vuoi saperne di più sui nostri prodotti?

Kujdes, plotëso saktë këtë fushë.
Kujdes, fut një adresë email-i të vlefshëm.
Kujdes, plotëso saktë këtë fushë.

Duke paraqitur pranoj politikat e privatësisë

Kujdes, plotëso saktë këtë fushë.

Përfundimi regjistrim në Newletter

Ndaj

Produkte në vitrinë

  • Readymesh
  • Syntech Poliurea
  • Syntech H.A.G.