DISTAK-M

Physico-chemical release agent for metal formworks

Kodi: ADX.0033

Përbërësit: 1

Pamja: I lëngshëm

Release agent based on selected organic compounds, promoting removal and anti-corrosive agents, ready-to-use, specific for metal moulds. DISTAK-M should be used undiluted, sprayed directly on the surfaces to be treated.

Linee di appartenenza

Vetitë themelore

jetëgjatësia

Jetëgjatësia: 12 muaj

pesha-specifike

Pesha specifike: 0.90 kg/dm³

temperatura-e-aplikimit

Temperatura e aplikimit: +5 / +35 °C

Veçoritë teknike

Not to be diluted

Ngjyrat në dispozicion

- Yellow

Amballazhime dhe përmasa

- Bidon 25 l

- Fusto 220 l

Vetitë

DISTAK-M performs a physico-chemical action: the product, properly applied, forms an extremely thin separating film between the formwork and the fresh concrete, allowing easy detachment and the resulting surfaces are free from stains and soiling. DISTAK-M is suitable for "stripping" metal moulds, both in traditional buildings and in prefabrication with normal and/or steam curing.

The chemical activity, connected with the reaction, at superficial level with the alkalis of the fresh concrete, which allows the elimination of the barrier effect, leaves surfaces without removal problems for subsequent coatings and painting.

It facilitates formwork removal, without greasing or staining the workpiece. It prevents cracking and bubbles on the final surfaces of the product. After formwork removal, it can be painted or treated with another type of finish. It protects the formwork from rust. It can be used as a protective agent on truck mixers or equipment, to reduce internal and external concrete incrustations.

Konsumi

With 1 litre of DISTAK-M, correctly applied, it is possible to consider an indicative yield of approximately 30-50 m², according to the quality of the formwork.

Fushat e përdorimit

Release treatments for concrete castings in metal moulds with normal and accelerated curing.

Mënyra e përdorimit

DISTAK-M is a ready-to-use product that must be applied as a spray. With one litre of DISTAK-M, correctly applied, the indicative yield is about 30-50 m², depending on the quality of the formwork.
Any excess product must be removed; any overdosage may compromise the stripping or the success of the superficial appearance of the casting.

Mënyrat e përdorimit

- Spruco

- Brushë

- Rrul

Mjetet e pastrimit

- Ujë

Shtresat e lejuara

- Sipërfaqet metalike

Na kontaktoni

Vuoi saperne di più sui nostri prodotti?

Kujdes, plotëso saktë këtë fushë.
Kujdes, fut një adresë email-i të vlefshëm.
Kujdes, plotëso saktë këtë fushë.

Duke paraqitur pranoj politikat e privatësisë

Kujdes, plotëso saktë këtë fushë.

Përfundimi regjistrim në Newletter

Ndaj

Produkte në vitrinë

  • Concrete Repar
  • Pro Seal
  • Syntech H.A.G.