CONSILEX IDROCON
Reinforcing repellent for masonry surfaces
Kodi: CSX.0022
Përbërësit: 1
Pamja: I lëngshëm
Special balanced solution of fumed silica esters, silanes, siloxanes, in solvent, characterised by high penetrating ability in silicic media and by the effective dual reinforcing and water repellence action, for protective, reinforcing and hydrophobising treatment of mineral and stone media. It does not result in colour variations or alterations of breathability.
Familja
Kategoritë e përdorimit
Kodi doganor
Linee di appartenenza
Vetitë themelore
Jetëgjatësia: 12 muaj
Temperatura e aplikimit: +10 / +30 °C
Ngjyrat në dispozicion
- E tejdukshme
Amballazhime dhe përmasa
- Bidon 10 l
- Bidon 25 l
- Bidon 5 l
- Koli: 75 x (Bidon 10 l)
Vetitë
CONSILEX IDROCON exerts a dual action of reinforcement and water repellence due to the peculiar reaction with atmospheric moisture and the silica present in the media. Products treated with CONSILEX IDROCON will benefit from improvements obtained in respect of the prevention of saline efflorescence, of mildew, algae, lichens, etc., of the drastic reduction in chalking, the reinforcement of the mineral masonry fabric and of the adhesive improvement of paints and coatings present, in general.
Konsumi
From 0.20 to 1.00 litres of CONSILEX IDROCON for each square metre of surface to be treated, based on the porosity of the support.
Fushat e përdorimit
Protective, reinforcing, water repellent treatments of mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in the interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest.
Përgatitja e shtresave
The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam It is recommended.
Mënyra e përdorimit
The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. The reinforcing contribution will be completed after 2-3 weeks of treatment.
It is appropriate to apply the product on cold surfaces, protected from direct sunlight, in the thermal range +10 / +30°C.
Mënyrat e përdorimit
- Brushë
- Spruco
Mjetet e pastrimit
- Diluent Nitro
Shtresat e lejuara
- Beton
- Fibroçimento
- Gipse
- Kartonxhez
- Llaçe çimentoje, gëlqereje e të përziera
- Muratura me gurë
- Muratura me tulla me vrimë
- Muratura të përziera
- Shtuf
- Suva
- Tulla
Na kontaktoni
Vuoi saperne di più sui nostri prodotti?
Skeda teknike [ITA]
Skeda teknike [ENG]
Skeda teknike [ESP]
Skeda teknike [POR]
Skeda teknike [DEU]
Skeda teknike [FRA]
Skeda teknike [RUM]
