CLAYGRAIN

Sodium bentonite powder for waterproofing and excavation works

Kodi: PRS.0013

Përbërësit: 1

Pamja: Pluhur

CLAYGRAIN is a dissolved, anhydrous sodium bentonite powder, characterised by a montmorillonite content in excess of 95%, with low yield-point (proof). The product should be used as it is, to increase the amount of bentonite in punctual areas, or mixed with cement and water or just water to obtain a slightly expansive waterproofing mortar, suitable for smoothing any crawl spaces in the concrete prior to laying and refilling the CLAYTEX bentonite sheet.

Kodi doganor

2508 1000

Linee di appartenenza

Vetitë themelore

Temperatura e aplikimit: +5 / +35 °C

Produkt hidroekspansiv: _

Jetëgjatësia: 12 muaj

Rezistent ndaj rrezeve UV

I pandezshëm

Veçoritë teknike

Maximum humidity

<13 %

Permeability to 25 kPa of confinement

5.E-09 cm/s

Swelling rate

>29

Apparent density

0.9-1.00 g/cm³

Liquid limit

>550 %

Loss of liquid to the filter press

<18 ml

Ngjyrat në dispozicion

- Bezhë

Amballazhime dhe përmasa

- Qese 25 kg

Konsumi

Product to buy as needed.

Fushat e përdorimit

Reinforcing and/or filling injections. Plastic diaphragms. Punctual protective sealing of critical areas in waterproofing underground areas with bentonite systems.

Mënyra e përdorimit

The standard dosage is 60 l/m³ of water (standard minimum quantity). The indicated concentration can be adjusted, depending on the characteristics of the soil and the required viscosity. It is necessary to mix the product adequately during the preparation of the slurry to allow sufficient hydration.