Zbulo produktet

Solucione të integruara

Udhërrëfyes për zgjedhjen

Vende tematike

ANCHORSANA FIX
Quick compound, lime and aluminate based, for fixings and anchors
ANCHORSANA FIX
Quick compound, lime and aluminate based, for fixings and anchors
ANCHORSANA FIX
Quick compound, lime and aluminate based, for fixings and anchors

ANCHORSANA FIX

Quick compound, lime and aluminate based, for fixings and anchors

Kodi: INT.0018

Përbërësit: 1

Pamja: Pluhur

Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings.

Kodi doganor

3824 5090

Linee di appartenenza

Certifikata të fituara dhe Rregullore

EN 998-1

Llaçe për suva të brendshme dhe të jashtme – Llaç për çdo përdorim (GP)

EN 998-2

Llaç murature - llaç murature për përdorim të përgjithshëm (G)

M20

EN 998-2

Vetitë themelore

Përmasa maksimale e agregatit: 0.5 mm

Pesha specifike: 1.97 kg/dm³

Pot life: 15 min

Përzierja me ujë: 23 - 30 %

Jetëgjatësia: 6 muaj

Të përdoret me doreza mbrojtëse

Temperatura e aplikimit: +5 / +30 °C

I pandezshëm

Veçoritë teknike

Rezistenca në përkulje pas 28 ditësh

> 6 MPa

Përshkueshmëria e avullit të ujit

≤ 35 _

Përthitha kapilare

< 0.50 kg•h^0.5/m²

Ngurtësim në prekje

30 min

Rezistenca në përkulje pas 01 ditë

> 4 MPa

Rezistenca në ngjeshje pas 28 ditësh

> 20 MPa

Lidhja e aderimit

> 1.0 N/mm²

> 12 _

Forca në shtypje pas 1.5 orësh

> 4 MPa

Rezistenca në ngjeshje pas 01 dite

> 13 MPa

Reagimi ndaj zjarrit

A1 _

Moduli elastik

11000 N/mm²

Ngurtësimi i plotë

60 min

Ngjyrat në dispozicion

- Gri e hapur

Amballazhime dhe përmasa

- Koli: 50 x (Qese 25 kg)

- Qese 25 kg

Vetitë

The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing ANCHORSANA FIX with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles).

Konsumi

Approximately 1.6 kg of ANCHORSANA FIX for each cubic decimeter of volume to be filled.

Fushat e përdorimit

Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt.

Përgatitja e shtresave

Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface".

Mënyra e përdorimit

Pour about 2/3 of the mixing water into the mixer; gradually add ANCHORSANA FIX and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency.